• EnglishEspañol日本語한국어Português
  • Log inStart now

AWS Direct Connect monitoring integration

Important

Enable the AWS CloudWatch Metric Streams integration to monitor all CloudWatch metrics from your AWS services, including custom namespaces. Individual integrations are no longer our recommended option.

New Relic offers an integration for reporting your AWS Direct Connect data. This document explains how to activate this integration and describes the data that can be reported.

Activate integration

To enable this integration follow standard procedures to Connect AWS services to New Relic.

Configuration and polling

You can change the polling frequency and filter data using configuration options.

Default polling information for the AWS Direct Connect integration:

  • New Relic polling interval: 5 minutes
  • Amazon CloudWatch data interval: 1 minute

Find and use data

To find your integration data, go to one.newrelic.com > All capabilities > Infrastructure > AWS and select an integration.

You can query and explore your data using the following event type:

Entity

Event Type

Provider

Connection

AwsDirectConnectConnectionSample

AwsDirectConnectConnection

For more on how to use your data, see Understand and use integration data.

Metric data

This integration collects AWS Direct Connect data for Connection.

Direct Connect Connection data

Metric

Unit

Description

connectionState

Count

The state of the connection. 0 indicates DOWN and 1 indicates UP.

connectionBpsEgress

BitsPerSecond

The bitrate for outbound data from the AWS side of the connection. The number reported is the aggregate over the specified time period (5 minutes by default, 1 minute minimum).

connectionBpsIngress

BitsPerSecond

The bitrate for inbound data to the AWS side of the connection. The number reported is the aggregate over the specified time period (5 minutes by default, 1 minute minimum).

connectionPpsEgress

CountPerSecond

The packet rate for outbound data from the AWS side of the connection. The number reported is the aggregate over the specified time period (5 minutes by default, 1 minute minimum).

connectionPpsIngress

CountPerSecond

The packet rate for inbound data to the AWS side of the connection. The number reported is the aggregate over the specified time period (5 minutes by default, 1 minute minimum).

connectionCRCErrorCount

Count

The number of times cyclic redundancy check (CRC) errors are observed for the data received at the AWS device. This metric is a counter that might remain the same for an extended period of time because it is only reset when the device is reset. If this value does not increase, then there are no errors occurring.

connectionLightLevelTx

Count

Indicates the health of the fiber connection for egress (outbound) traffic from the AWS side of the connection. This metric is available for connections with 10-Gbps port speeds only.

connectionLightLevelRx

Count

Indicates the health of the fiber connection for ingress (inbound) traffic to the AWS side of the connection. This metric is available for connections with 10-Gbps port speeds only.

Copyright © 2024 New Relic Inc.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.