• EnglishEspañol日本語한국어Português
  • Log inStart now

Install the agent as a container

The infrastructure agent for Linux supports container environments by default. If you're running a container OS or have restrictions that require deploying the agent as a container, you can run a containerized version of our infrastructure agent. This can monitor metrics for the container itself, as well as the underlying host.

Using the custom (recommended) or basic setup allows the infrastructure agent to run inside a container environment. A host can only run one instance of the agent at a time, whether that's the containerized agent or the non-containerized version.

What you need

The containerized version of the infrastructure agent requires Docker 1.12 or higher.

From version 1.42, the infrastructure agent supports containerd, so it can be used in Kubernetes v1.24+, which removed support for Dockershim, or any other containerd-based solution. If both the containerd and the dockerd runtime sockets are available, the infrastructure agent will operate with the containerd runtime socket. The container must run on a Linux distribution and version supported by the infrastructure agent. The container image is available and supported on AMD64 and ARM64 architectures.

The log forwarder is not included with the containerized agent. We recommend installing the agent on the underlying host which provides all capabilities.

Custom setup (recommended)

The following are basic instructions for creating a custom Docker image on Linux. This allows you to deploy the infrastructure agent as a container that can monitor its underlying host.

Recommendation: Extend the newrelic/infrastructure image and use your own newrelic-infra.yml agent config file. Once your image is built, you can easily spin up a container without having to provide more launch time configurations. Do not provide secrets using environment variables with Docker.

Docker CLI

  1. Create the newrelic-infra.yml agent config file with your New Relic . For config option explanations, see configuration settings.

    license_key: YOUR_LICENSE_KEY
  2. Create the Dockerfile extending the newrelic/infrastructure image, and add your config to /etc/newrelic-infra.yml:

    FROM newrelic/infrastructure:latest
    ADD newrelic-infra.yml /etc/newrelic-infra.yml
  3. Build and tag your image:

    bash
    $
    docker build -t YOUR_IMAGE_NAME .
  4. Run the container from the image you built with the required required run flags:

    bash
    $
    docker run \
    >
    -d \
    >
    --name newrelic-infra \
    >
    --network=host \
    >
    --cap-add=SYS_PTRACE \
    >
    --privileged \
    >
    --pid=host \
    >
    --cgroupns=host # required on cgroup v2 \
    >
    -v "/:/host:ro" \
    >
    -v "/var/run/docker.sock:/var/run/docker.sock" \
    >
    YOUR_IMAGE_NAME
  5. For potential next steps, like how to see data in the UI, see What's next?

Docker Compose

  1. Create a folder to store the configuration files:

    bash
    $
    mkdir ~/newrelic-infra-setup
  2. Change directory to the one you've just created:

    bash
    $
    cd ~/newrelic-infra-setup
  3. Create the newrelic-infra.yml agent config file with your New Relic . For config option explanations, see configuration settings.

    bash
    $
    echo "license_key: YOUR_LICENSE_KEY" > newrelic-infra.yml
  4. Create the newrelic-infra.dockerfile extending the newrelic/infrastructure image, and add your config to /etc/newrelic-infra.yml:

    bash
    $
    touch newrelic-infra.dockerfile
    bash
    $
    vim newrelic-infra.dockerfile # you can use any text editor
  5. Put the following content in the file:

    FROM newrelic/infrastructure:latest
    ADD newrelic-infra.yml /etc/newrelic-infra.yml
  6. Create docker-compose.yaml:

    bash
    $
    touch docker-compose.yaml
    bash
    $
    vim docker-compose.yaml # you can use any text editor

    Put following content in the file:

    version: '3'
    services:
    agent:
    container_name: newrelic-infra
    build:
    context: .
    dockerfile: newrelic-infra.dockerfile
    cap_add:
    - SYS_PTRACE
    network_mode: host
    pid: host
    privileged: true
    volumes:
    - "/:/host:ro"
    - "/var/run/docker.sock:/var/run/docker.sock"
    restart: unless-stopped
  7. Build and start docker-compose:

    bash
    $
    docker-compose -f docker-compose.yaml up -d
  8. For potential next steps, like how to see data in the UI, see What's next?

Basic setup

To use the basic setup with a base New Relic infrastructure image:

Docker CLI

  1. Run the container with the required run flags:

    bash
    $
    docker run \
    >
    -d \
    >
    --name newrelic-infra \
    >
    --network=host \
    >
    --cap-add=SYS_PTRACE \
    >
    --privileged \
    >
    --pid=host \
    >
    --cgroupns=host # required on cgroup v2 \
    >
    -v "/:/host:ro" \
    >
    -v "/var/run/docker.sock:/var/run/docker.sock" \
    >
    -e NRIA_LICENSE_KEY=YOUR_LICENSE_KEY \
    >
    newrelic/infrastructure:latest
  2. For potential next steps, like how to see data in the UI, see What's next?

Docker Compose

  1. Create docker-compose.yaml:

    bash
    $
    touch docker-compose.yaml
    bash
    $
    vim docker-compose.yaml # you can use any text editor

    Put following content in the file:

    version: '3'
    services:
    agent:
    container_name: newrelic-infra
    image: newrelic/infrastructure:latest
    cap_add:
    - SYS_PTRACE
    network_mode: host
    pid: host
    privileged: true
    volumes:
    - "/:/host:ro"
    - "/var/run/docker.sock:/var/run/docker.sock"
    environment:
    NRIA_LICENSE_KEY: "YOUR_LICENSE_KEY"
    restart: unless-stopped
  2. Build and start docker-compose:

    bash
    $
    docker-compose -f docker-compose.yaml up -d
  3. For potential next steps, like how to see data in the UI, see What's next?

Required container privileges

Due to resource isolation from the host and other containers via Linux namespaces, a container has a very restricted view and control of its underlying host's resources by default. Without these extra privileges, the infrastructure agent cannot monitor the host and its containers.

The infrastructure agent collects data about its host using system files and system calls. For more information about how the infrastructure agent collects data, see our documentation about infrastructure monitoring and security. Required privileges include:

Required when using docker on cgroup v2 as it is private by default. This allows the agent to gather container metrics. It is available since docker engine API v1.41.

Privilege

Description

--network=host

Sets the container's network namespace to the host's network namespace. This allows the agent to collect the network metrics about the host.

-v "/:/host:ro"

Bind mounts the host's root volume to the container. This read-only access to the host's root allows the agent to collect process and storage metrics as well as Inventory data from the host.

--cap-add=SYS_PTRACE

Adds the Linux capability to trace system processes. This allows the agent to gather data about processes running on the host. Read more here.

--privileged

--pid=host

--cgroupns=host

-v "/var/run/docker.sock:/var/run/docker.sock"

Bind mounts the host's Docker daemon socket to the container. This allows the agent to connect to the Engine API via the Docker daemon socket to collect the host's container data. If you interact with the containerd runtime instead, replace this mount with /run/containerd/containerd.sock:/run/containerd/containerd.sock.

Did this doc help with your installation?

Next steps after install

For next steps after install is completed, see What's next?

Inventory collected

Inventory is collected from the infrastructure agent's built-in data collectors. The infrastructure agent collects this data for Linux systems running with containers.

Category

Source

Data collected using

metadata

agent_config

Agent's complete config file

system

uptime -s, /etc/redhat-release, /proc/cpuinfo, /etc/os-release, /proc/sys/kernel/random/boot_id, /proc/sys/kernel/osrelease, /sys/class/dmi/id/product_uuid, /sys/devices/virtual/dmi/id/sys_vendor, /sys/devices/virtual/dmi/id/product_name

Container data

Once the infrastructure agent is running in a Docker container, it can collect the same host compute data and event data that the infrastructure agent is capable of collecting when running natively on a host. For more information, see our documentation about how to view your Docker container data.

Containerized agent image

The containerized agent image is built from an Alpine base image.

Check the source code

This integration is open source software. You can browse its source code and send improvements, or create your own fork and build it.

Copyright © 2024 New Relic Inc.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.